When the proper steps are followed, fence panel installation can be simple. Planning the fence is an important first step. This process entails marking the area to be fenced and using strings to determine the panel fence’s distance. If the panel fence has corners, ensure that the lines are at a 90-degree angle. Following the initial planning stages of the installation, it’s time to dig the holes for the end posts.
According to a YouTube video by The Home Depot titled “How to Install a Panel Fence,” the holes should be about a third the length of the post and should be dug an additional 6 feet deep before being filled with gravel. Concrete should be used for the posts, and any bubbles should be removed. You can also refer to the manufacturer’s instructions on the subject.
The next step involves screwing or nailing the fasteners to the posts. Additionally, you can fasten them from the inside of the fence using fasteners. Additionally, during the installation process, you must ensure that the posts are leveled. As you install the remaining posts, ensure that fence replacement is done in a straight line.
